M.2 SSD (ngff) Adapter Card 3-port - 1 X Pci-e (nvme) M.2, 2 X SATA III M.2 - Pci-e 3.0

Specification

Connector Type(s): PCI Express x4 Male

Internal Ports: M.2 SATA (NGFF, B-Key) Receptacle

M.2 (NGFF, M-Key, PCIe x4) Receptacle

SATA (7 pin, Data) Plug

Operating Temperature: 5°C to 50°C (41°F to 122°F)

Storage Temperature: -25°C to 70°C (-13°F to 158°F)

Humidity: 20%~80% RH (Non-condensing)

Ports: 3

Interface: M.2 SATA

Bus Type: PCI Express

Card Type: Standard Profile (LP bracket incl.)

SATA

Port Style: Integrated on Card

M.2 PCIe

Industry Standards: Serial ATA 3.0 specification - SATA I/II/III (1.5/3/6Gbps)

PCI Express 3.0

LED Indicators: M.2 drive status/activity

Power

Shipping (Package) Weight: 122 g [4.3 oz]

Type and Rate: SATA III (6 Gbps)

Port Multiplier: No

Bootable: Yes

RAID: No

ATAPI Support: Yes

MTBF: 50,000 Hours

Product Length: 120 mm [4.7 in]

Product Width: 20 mm [0.8 in]

Product Height: 120 mm [4.7 in]

Product Weight: 46 g [1.6 oz]

OS Compatibility: OS Independent; No additional drivers or software required

Note: When installed in a compatible operating system, the card is natively supported and doesn't require any additional drivers or software. However, your operating system must natively support PCIe SSDs (NVMe - Non-Volatile Memory Express).

System and Cable Requirements: A computer enabled with PCI Express (PCIe), and an available PCI Express x4, x8, or x16 slot

One or two SATA host ports on the host computer (for example, the SATA controller

Note: The maximum throughput of this card is limited by the bus interface. If used with PCI Express Gen 1.0 enabled computers, the max throughput is 2.5Gbps per lane. If used with PCI Express Gen 2.0 enabled computers, the max throughput is 5Gbps per lane.

An operating system that natively supports PCIe SSDs (NVMe), such as:

Included in Package: 3-port M.2 NGFF SSD adapter card

low-profile bracket

M.2 mounting screws

M.2 mounting standoffs

M.2 mounting nuts

screwdriver

quick-start guide

Alle inspanningen werden geleverd om de correctheid van de gegevens te verzekeren. Realdolmen kan in geen enkel geval verantwoordelijk worden gesteld voor foutieve productbeschrijvingen, tax codes en/of prijzen in gevolge enige veranderingen.De verstrekte informatie (specificaties, taxen, prijzen...) is uitsluitend indicatief en kan op ieder moment zonder verdere aankondiging worden gewijzigd.